Investors

WEBSITE DISCLAIMER

PLEASE READ THIS NOTICE CAREFULLY. IT APPLIES TO ALL PERSONS WHO VIEW THIS WEBSITE. VIEWING THIS INFORMATION MAY NOT BE LAWFUL IN CERTAIN JURISDICTIONS. PLEASE NOTE THAT THE DISCLAIMER SET OUT BELOW MAY BE ALTERED OR UPDATED. YOU SHOULD READ IT IN FULL EACH TIME YOU VISIT THE WEBSITE. BY ACCESSING THIS INFORMATION ON THIS WEBSITE, YOU AGREE TO THE TERMS AND CONDITIONS BELOW, INCLUDING ANY MODIFICATIONS THAT MAY BE MADE TO THEM FROM TIME TO TIME.

THESE MATERIALS ARE NOT DIRECTED AT OR INTENDED TO BE ACCESSED BY PERSONS LOCATED IN THE UNITED STATES OR OTHER JURISDICTIONS OUTSIDE INDIA.

The following disclaimer applies to the documents of Mold-Tek Packaging Limited (the “Company”, and such rights issue documents, the “Documents” and each, a “Document”) hosted on this website in connection with the Company’s issue of partly paid-up equity shares (“Rights Equity Shares”) along with detachable warrants (“Warrants”) on a fast track rights basis (the “Issue” and the Rights Equity Shares together with the Warrants, the “Rights Securities”). The Documents have been made available on this website in electronic form solely to comply with the provisions of the Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended and SEBI Circular No. SEBI/HO/CFD/DIL2/CIR/P/2020/78 dated May 06, 2020 read with the SEBI Circular SEBI/HO/CFD/DIL1/CIR/P/2020/136 dated July 24, 2020. You are advised to read this disclaimer carefully before reading, accessing or making any other use of the Documents. By accessing the Documents, you agree to follow the following terms and conditions, including any modifications to them from time to time. References to the Company herein include its subsidiary which is consolidated in its accounts.

NOTHING HEREIN CONSTITUTES AN OFFER OF SECURITIES FOR SALE IN ANY JURISDICTION WHERE IT IS UNLAWFUL TO DO SO.

The contents of the Documents are for your information only. No part of the contents herein shall be copied or duplicated in any form by any means or redistributed. Neither the Company, nor any of its representatives or agents are soliciting any action based on any of the information contained on this website, including the Documents, and such information should not be construed as an offer, or invitation or offer to sell or the solicitation of any offer to buy or subscribe for or purchase any security. Neither the Company, nor any of its representatives or agents represents that the contents of the Documents are accurate or complete. The information contained in the Documents may not be updated since its original publication date and may not reflect the latest updates.

The Documents may contain statements about future events and expectations that constitute forward-looking statements. There can be no assurance that the results and events contemplated by the forward-looking statements contained there will in fact occur. The Company, its Directors, the Lead Manager or any of their respective affiliates do not make any representation or warranty, express or implied, as to, and do not accept any responsibility or liability with respect to, the fairness, accuracy, completeness or correctness of any information or opinion in the Documents.

Please note that because of restrictions imposed by applicable law or regulation on soliciting securities business in various jurisdictions, subscription to the Issue will not be permitted to residents of certain jurisdictions. The information contained in this portion of our website and the Documents are not intended to be, and should not be, viewed by any person in the United States or in any other jurisdiction outside India where the offer and sale of the securities is not permitted under the laws of such jurisdictions. The Documents are not intended for distribution to, or use by, any person or entity in any jurisdiction or country where (a) distribution or use of such information would not be permissible under or in violation of any applicable law or regulation; or (b) the Company would by virtue of such distribution become subject to new or additional registration requirements.

The information on this website and the Documents are directed solely to Eligible Equity Shareholders of the Company as on the Record Date i.e. October 22, 2020, as contemplated in the Documents. This website and the Documents should not be reproduced, transmitted or distributed to any other person.

The Rights Entitlements and the Rights Securities (as defined in the LOF) have not been and will not be registered under the Securities Act of 1933, as amended (the “Securities Act”), or any United States of America’s State securities laws and may not be offered, sold, resold or otherwise transferred within the United States or any of its States or the territories or possessions thereof (the “United States” or “U.S.”), except in a transaction not subject to, exempt from the registration requirements of the Securities Act and applicable State securities laws. Accordingly, the Rights Entitlements and the Rights Securities are being offered and sold only outside the United States in offshore transactions in reliance on Regulation S under the Securities Act to existing shareholders located in jurisdictions where such offer and sale of the Rights Securities is permitted under applicable law. The Offering of Rights Securities is not, and under no circumstances is to be construed as, an offering of any Rights Securities or Rights Entitlement for sale in the United States or as a solicitation therein of an offer to buy any of the said securities, Accordingly, the Documents should not be forwarded to or transmitted in or into the United States at any time.

The Documents do not constitute, and may not be used in connection with, an offer or solicitation in any place where offers or solicitations are not permitted by law. If you have gained access to this website and the Documents contrary to any of the restrictions herein, you are not authorized and will not be able to purchase any of the securities described in the Documents.

Any potential investor should note that investment in the Rights Securities involves a high degree of risk. For details, potential investors should refer to the Letter of Offer dated October 17, 2020 issued by the Company in connection with the Issue, including the section titled “Risk Factors”.

Neither the Company, nor any of its representatives or agents accept any liability whatsoever, direct or indirect, that may arise from the use of the information contained on this website or the Documents. Nothing on this website or in the Documents constitutes a recommendation by the Company or its representatives or agents to subscribe to or buy or sell any securities.

The Company has taken all necessary steps to ensure that the contents of the Document as appearing on this website are identical to the Document filed with the relevant regulatory authorities in India. However, you are reminded that documents transmitted in electronic form may be altered or changed during the process of transmission and consequently neither the Company, nor any of its representatives or agents accept any liability or responsibility whatsoever in respect of alterations or changes which have taken place during the course of transmission of electronic data. None of the Company, its representatives or its agents will be responsible for any loss or damage that could result from interception and interpretation by any third parties of any information being made available to you through this website.

You are accessing this website at your own risk and it is your responsibility to take precautions to ensure that it is free from viruses and other items of a destructive nature. Neither the Company, the Lead Manager nor any of their affiliates their directors, officers and employees will be liable or have any responsibility of any kind for any loss or damage that you incur in the event of any failure or disruption of this website, or resulting from the act or omission of any other party involved in making this website or the data contained therein available to you, or from any other cause relating to your access to, inability to access, or use of the website or these materials.

You are accessing this website at your own risk and it is your responsibility to take precautions to ensure that it is free from viruses and other items of a destructive nature. Neither the Company, the Lead Manager nor any of their affiliates their directors, officers and employees will be liable or have any responsibility of any kind for any loss or damage that you incur in the event of any failure or disruption of this website, or resulting from the act or omission of any other party involved in making this website or the data contained therein available to you, or from any other cause relating to your access to, inability to access, or use of the website or these materials.

YOU HEREBY REPRESENT THAT YOU ARE ACCESSING THE DOCUMENTS ON THIS WEBSITE ON THE BASIS THAT YOU ARE A PERSON INTO WHOSE POSSESSION THESE DOCUMENTS MAY BE LAWFULLY DELIVERED IN ACCORDANCE WITH ALL APPLICABLE LAWS. IF ANY APPLICABLE LAWS DO NOT PERMIT TO ACCESS THE WEBSITE OR VIEW THE DOCUMENTS ON THIS WEBSITE OR YOU ARE IN ANY DOUBT AS TO WHETHER YOU ARE PERMITTED TO VIEW THESE DOCUMENTS, PLEASE EXIT THIS WEBSITE.

PLEASE NOTE THAT THE DOCUMENTS USED FOR SUBSCRIPTION TO THE ISSUE IN CONTRAVENTION OF THE ABOVE WILL BE REJECTED WITH NO RECOURSE TO THE COMPANY OR ITS REPRESENTATIVES OR AGENTS.

I hereby declare that I am a resident of India and I have read the Legal Disclaimer above and am entitled to receive information contained on this website.

  I certify that I am authorized to access this site

Mold-Tek Packaging Limited (MTPL), leader in rigid plastic packaging was incorporated in the year 1986 by two qualified technocrats Mr. J Laxman Rao and Mr. A Subrahmanyam. The company was into manufacture of rigid plastics containers and later in 2001, diversified and started the KPO division.

The KPO (Mold-Tek Technologies Ltd) is in the business of providing structural engineering services – viz. designing & detailing for reputed clients across the globe. It is also a provider of Mechanical engineering services such as Product designing, Poles and Towers designing, Process Engineering and BIW tooling. It has recently forayed into IT services such as Cloud infrastructure, Salesforce, ERP and Mobile Integration.

The packaging division has been demerged and formed as a separate entity and listed in BSE

MOLD-TEK PACKAGING LIMITED

Mold-Tek Packaging Limited is the leader in manufacturing injection molded rigid plastic packaging containers. (BSE Code: 533080). During the last three decades, Mold-Tek has been the leader, innovator and torch bearer in introducing many world class packaging products in India such as high quality airtight and pilfer-proof pails for the Paint, Lubricant, Food, Pharmacy and Cosmetic industries.

Over the years, MTPL has grown by continuously adding new clients – both in the same industry and across new industries. In addition to growth, this ensures sufficient diversification and manages risk levels at high growth rate to the shareholders. High retention of the existing clients especially in the paint and lubricant industry is noteworthy.

The company has seven manufacturing units and three stock points across India to cater to rising demand. All the plants are ISO certified and are equipped with the best Machines, Molds and Decoration Equipment to offer high quality pails to all its clients.

Mold-Tek is the first company in India to introduce “In-Mold Labeling (IML)” concept for decorating plastic containers using ROBOTS. IML enables photographic quality decoration with complete hygienic and hands free production of containers suitable for food and FMCG products. WE ARE THE ONLY COMPANY IN INDIA TO HAVE COMPLETELY INTEGRATED FACILITIES RANGING FROM LABEL MAKING, MOLD ADAPTATIONS TO MAKING IN-HOUSE ROBOTS. In recognition of this technical excellence, Mold-Tek received “Tech savvy” and “Best SME” awards from ICICI- CNBC TV 18 and Crisil for the year 2013.

As the trend is to follow new, hygienic and world class decorated containers to build brand image for the products, IML decorated thin wall containers are going to rule the rigid packaging in coming years especially in Food and FMCG. The purchasing power and the disposable income in the Indian economy had grown rapidly in the last few years. Changing lifestyle patterns has shifted consumer preference towards branded, well packaged and presented products including packaged/ready-to-eat food products. In this sense, packaging plays a crucial role in the marketability of a product. Mold-Tek sees a huge opportunity for the packaging business, especially rigid packaging, in Food, Paint and FMCG space.

The scope and opportunity in the food segment is huge. Products that can be packed in IML decorated containers are Ice creams, Jams, Milk and nutrition powders, Yoghurt, Butter, cheese, Noodles, apart from cosmetics, paints and lubricants.

Announcing the unaudited results, on February 12, 2015, Mr. J. Lakshmana Rao, Chairman and managing director, said, “The steep reduction in crude prices has reduced the RM costs drastically from a high of Rs. 110000 per MT to Rs. 79000 per MT as on date. Company has shown improved performance in the last quarter once again in spite of their impact of stock valuation taken at a net realizable value. Steep reduction in RM costs augur well for the company and enable quicker penetration of our innovative “Square Edible Oil” packs being introduced by the company for the first time in India. Through this innovative product range, Mold-Tek is entering into Rs. 1000 edible oil packaging segment thereby expanding its arena of operations beyond its traditional paint and lube industry.”

Mold-Tek deputed a team to UAE for initiating the process of setting up a manufacturing plant to cater to the huge demand for IML containers in paint, lube and food segments in the Gulf region.

Our ability to produce In- house Molds, IML labels and even Robots is a formidable entry barrier apart from helping us in reducing costs and remain competitive. Increasing IML product sales is reflecting in rising EBIDTA margins.

Achievements:

The company has won the “Quality Champion Award” from Asian Paints (I) Ltd., for the exemplary quality performance during the period April 2012 to September 2014.

Highlights of Qualified Institution Placement (QIP):

The company has successfully completed its issue of shares through QIP and raised funds worth Rs. 55.01 Crores and allotted 24,98,350 equity shares at a price of Rs. 220.17 (including Rs. 210.17 towards the premium), which has resulted in increase of paid up capital to Rs. 13,84,05,260. SBI mutual funds, DSP Blackrock, Canara Robaco mutual fund and others have participated in the QIP.

know more

Share transfer agents

All inquiries relating to the shareholders' accounting records, share transfers, transmission of shares, change of address, non-receipt of refund orders, loss of share certificates etc, should be addressed to our share transfer agents whose details are given below:

Contact Details

Company Secretary

Mr. Thakur Vishal Singh

Plot.No.700, Road.No.36,
Jubilee Hills, Hyderabad – 500033
Telangana, India.
Phone No: 040-40300330
Fax .No. : 040-40300328
E-Mail: cs@moldtekindia.com

Investor Relation Department

Ms. K V Ramani (DGM-IR) / Nodal Officer

Plot.No.700, Road.No.36,
Jubilee Hills, Hyderabad – 500033
Telangana, India.
Phone No: 040-40300330
Fax .No. : 040-40300328
E-Mail: ir@moldtekindia.com

Registrar and Transfer Agent

XLSOFTECH SYSTEMS LIMITED

#3, Sagar Society, Road.No.2,
Banjara Hills, Hyderabad- 500034.
Phone No: 040-23545913, 14, 15.
Fax. No : 040-23553214.
E-Mail ID : xlfield@gmail.com | xlfield@rediffmail.com


Bankers

Citibank N.A., ICICI Bank Ltd.

Solicitors and legal advisors

M. Radhakrishna Murthy, Advocate
Vidyanagar, Hyderabad

Statutory Auditors

M. Anandam & Co.
Secunderabad-500003.

Internal auditors

Praturi & Sriram.
Hyderabad-500029.


Stock exchanges where the securities are listed

Mold-Tek Packaging Ltd - Bombay Stock Exchange (BSE) (stock code: 533080)

Mold-Tek Packaging Ltd – National Stock Exchange (NSE) (stock code: MOLDTKPAC)

Financial reporting for Tentative Date
Audited results for year ending on 31st March, 2021 On or before 30th May, 2021
Unaudited results for quarter ending on 31st December, 2020 On or before 14th February 2020
Unaudited results for quarter ending on 30th September, 2020 On or before 14th November, 2020
Unaudited results for quarter ending on 30th June, 2020 On or before 14th August, 2020